PeriodInDay

The time in days dedicated for indexing data on each child server, after the first roll over has occurred. At the end of this period, a DREINITIAL index action is sent to the next server and ACI requests are sent to the DAH to power up or power down the appropriate child servers.

If you do not use this parameter, then you must use PeriodInSec to set a period.

Note: If you use this parameter, then you must set NextServerStartTime=00:00.

Type: Long
Default:  
Required: No
Configuration Section: RoundRobinMode
Example: PeriodInDay=1
See Also:

PeriodInSec

NextServerStartTime


© 2013 Hewlett-Packard Development Company, L.P.