Open topic with navigation
Use the following procedure to configure SSL in a setup where you configure the DAH in the stand-alone DAH configuration file.
Open the DAH configuration file in a text editor.
Find either the
[Server] section, the
[DistributedEngineN] section, or both.
SSLConfig setting to specify the section in which you have set the SSL details for the connection, usually
SSLOptionN. For example:
[Server] (other server settings...) SSLConfig=SSLOption0 [DistributedEngine0] SSLConfig=SSLOption0 [DistributedEngine1] SSLConfig=SSLOption1
In this example, incoming ACI calls and outgoing calls to
DistributedEngine0 share the same SSL configuration, and outgoing calls to
DistributedEngine1 use a different configuration.
[SSLOptionN] section for each unique
SSLConfig setting. Each
SSLOption entry must contain the
SSLPrivateKey parameters. For example:
[SSLOption0] SSLMethod=TLSV1.2 SSLCertificate=host1.crt SSLPrivateKey=host1.key [SSLOption1] SSLMethod=TLSV1.2 SSLCertificate=host2.crt SSLPrivateKey=host2.key
Save and close the configuration file.
Restart the DAH for your changes to take effect.